Presence and motion detectors > Motion detectors/ Spotlights > Outdoor without spotlight > Not remote-controlled > theLuxa S150 BK

theLuxa S150 BK

Description

Motion detector (PIR)
Automatic lighting control based on presence and brightness
150° detection angle
For outdoor use
Additional creep under protection
Sensor head can be turned by ± 90° horizontally and by 30° downwards
Adjustable brightness switching value and switch-off delay
Mixed light measurement suitable for the control of fluorescent, incandescent, halogen lamps and LEDs
Zero-cross switching for relay-saving switching and high lamp loads
Teach-in of current brightness value possible
Pulse function
Test function for checking detection area
Installation on flush-mounted socket possible (60 mm)
Single-handed plug-in installation
Instant start-up possible via factory preset
Controls are place protected
Terminal for protective earth conductor

Operating voltage	230 V AC
Frequency	50 Hz
Stand-by consumption	~0,9 W
Light measurement	Mixed light measurement
Number of channels	1
Installation type	Wall installation
Setting range brightness	5 – 1000 lx
Switching capacity light	10 A (at 230 V AC, cos φ = 1), 6 A (at 230 V AC, cos φ = 0.6), 3 AX (at 230 V AC, cos φ = 0.3)
Detection angle	150°
Installation height	2 – 4 m
Light switch-off delay	1 s-20 min
Incandescent lamp load	2300 W
Fluorescent lamp load (conventional) not corrected	400 VA
Fluorescent lamp load (conventional) parallel-corrected	400 VA 42 µF
Fluorescent lamp load (conventional) series-corrected	400 VA
Fluorescent lamp load (electronic ballast)	600 W
Energy saving lamps	150 W
Inrush current	max. 300 A / 200 µs
LED lamp < 2 W	25 W
LED lamp 2-8 W	200 W
LED lamp > 8 W	200 W
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Ambient temperature	-25 °C … +45 °C
Protection class	II
Type of protection	IP 55